View STB19NF20_8323482.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. october 2012 doc id 12758 rev 5 1/20 20 STB19NF20, stf19nf20, stp19nf20 n-channel 200 v, 0.15 typ., 15 a mesh overlay? power mosfet in d 2 pak, to-220fp and to-220 packages datasheet ? production data extremely high dv/dt capability gate charge minimized very low intrinsic capacitances applications switching application description this power mosfet is designed using the company?s consolidated strip layout-based mesh overlay? process. the result is a product that matches or improves on the performance of comparable standard parts from other manufacturers. figure 1. internal schematic diagram features type v dss r ds(on) i d p w STB19NF20 200v <0.16 15a 90w stf19nf20 200v <0.16 15a 25w stp19nf20 200v <0.16 15a 90w to-220 d2pak 1 2 3 to-220fp 1 2 3 tab 1 3 tab !-v $4!" ' 3 table 1. device summary order codes marking package packaging STB19NF20 19nf20 d 2 pak tape and reel stf19nf20 19nf20 to-220fp tu b e stp19nf20 19nf20 to-220 www.st.com
contents STB19NF20, stf19nf20, stp19nf20 2/20 doc id 12758 rev 5 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5 packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
STB19NF20, stf19nf20, stp19nf20 electrical ratings doc id 12758 rev 5 3/20 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit to-220/d2pak to-220fp v ds drain-source voltage 200 v v gs gate-source voltage 20 v i d drain current (continuous) at t c = 25c 15 15 (1) 1. limited by package a i d drain current (continuous) at t c =100c 9.45 9.45 (1) a i dm (2) 2. pulse width limited by safe operating area drain current (pulsed) 60 60 (1) a p tot total dissipation at t c = 25c 90 25 w derating factor 0.72 0.2 w/c v iso insulation withstand voltage (rms) from all three leads to external heat sink (t=1s;t c =25c) -- 2500 v dv/dt (3) 3. i sd 15a, di/dt 300a/s, v dd = 80%v (br)dss peak diode recovery voltage slope 15 v/ns t j t stg operating junction temperature storage temperature -55 to 150 c table 3. thermal data symbol parameter value unit to-220 d2pak to-220fp r thj-case thermal resistance junction-case max 1.39 5 c/w r thj-pcb thermal resistance junction-pcb max -- 50 -- r thj-a thermal resistance junction-ambient max 62.5 c/w t l maximum lead temperature for soldering purpose 300 c
electrical ratings STB19NF20, stf19nf20, stp19nf20 4/20 doc id 12758 rev 5 table 4. avalanche data symbol parameter value unit i ar avalanche current, repetitive or not-repetitive (pulse width limited by tj max) 15 a e as single pulse avalanche energy (starting tj=25c, id=iar, vdd=50v) 110 mj
STB19NF20, stf19nf20, stp19nf20 electrical characteristics doc id 12758 rev 5 5/20 2 electrical characteristics (t case =25c unless otherwise specified). table 5. on/off states symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage i d = 1ma, v gs = 0 200 v i dss zero gate voltage drain current (v gs = 0) v ds = 200 v v ds = 200 v, t c = 125c 1 10 a a i gss gate body leakage current (v ds = 0) v gs = 20v 100 na v gs(th) gate threshold voltage v ds = v gs , i d = 250a 2 3 4 v r ds(on) static drain-source on- resistance v gs = 10v, i d = 7.5a 0.15 0.16 table 6. dynamic symbol parameter test conditions min. typ. max. unit g fs (1) 1. pulsed: pulse duration=300s, duty cycle 1.5% forward transconductance v ds =8v, i d = 7.5a 12 s c iss c oss c rss input capacitance output capacitance reverse transfer capacitance v ds =25v, f=1 mhz, v gs =0 800 165 26 pf pf pf q g q gs q gd total gate charge gate-source charge gate-drain charge v dd =160v, i d = 15a v gs =10v (see figure 17) 24 4.4 11.6 nc nc nc table 7. switching times symbol parameter test conditions min. typ. max. unit t d(on) t r tu r n - o n d e l ay t i m e rise time v dd =100 v, i d = 7.5a, r g =4.7 , v gs =10v (see figure 16) 11.5 22 ns ns t d(off) t f turn-off delay time fall time v dd = 100 v, i d = 7.5a, r g = 4.7 , v gs = 10v (see figure 16) 19 11 ns ns
electrical characteristics STB19NF20, stf19nf20, stp19nf20 6/20 doc id 12758 rev 5 table 8. source drain diode symbol parameter test conditions min typ. max. unit i sd source-drain current 15 a i sdm (1) 1. pulse width limited by safe operating area. source-drain current (pulsed) 60 a v sd (2) 2. pulsed: pulse duration = 300s, duty cycle 1.5% forward on voltage i sd =15a, v gs =0 1.6 v t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd =15a, v dd =50v di/dt = 100a/s, (see figure 21) 125 0.55 8.8 ns c a t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd =15a, v dd =50v di/dt = 100a/s, tj=150c (see figure 21) 148 0.73 9.9 ns c a
STB19NF20, stf19nf20, stp19nf20 electrical characteristics doc id 12758 rev 5 7/20 2.1 electrical characteristics (curves) figure 2. safe operating area for to-220 / d2pak figure 3. thermal impedance for to-220 / d2pak figure 4. safe operating area for to-220fp figure 5. thermal impedance for to-220fp figure 6. output characteristics figure 7. transfer characteristics
electrical characteristics STB19NF20, stf19nf20, stp19nf20 8/20 doc id 12758 rev 5 figure 8. static drain-source on-resistance figure 9. normalized bv dss vs temperature figure 10. gate charge vs gate-source voltage figure 11. capacitance variations figure 12. normalized gate threshold voltage vs temperature figure 13. normalized on resistance vs temperature
STB19NF20, stf19nf20, stp19nf20 electrical characteristics doc id 12758 rev 5 9/20 figure 14. source-drain forward characteristics figure 15. maximum avalanche energy vs temperature
test circuit STB19NF20, stf19nf20, stp19nf20 10/20 doc id 12758 rev 5 3 test circuit figure 16. switching times test circuit for resistive load figure 17. gate charge test circuit figure 18. test circuit for inductive load switching and diode recovery times figure 19. unclamped inductive load test circuit figure 20. unclamped inductive waveform figure 21. switching time waveform
STB19NF20, stf19nf20, stp19nf20 package mechanical data doc id 12758 rev 5 11/20 4 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. table 9. d2pak (to-263) mechanical data dim. mm min. typ. max. a4.40 4.60 a1 0.03 0.23 b0.70 0.93 b2 1.14 1.70 c0.45 0.60 c2 1.23 1.36 d8.95 9.35 d1 7.50 e 10 10.40 e1 8.50 e2.54 e1 4.88 5.28 h 15 15.85 j1 2.49 2.69 l2.29 2.79 l1 1.27 1.40 l2 1.30 1.75 r0.4 v2 0 8
package mechanical data STB19NF20, stf19nf20, stp19nf20 12/20 doc id 12758 rev 5 figure 22. d2pak (to-263) drawing figure 23. d2pak footprint (a) a. all dimension are in millimeters 0079457_t 16.90 12.20 9.75 3 .50 5.0 8 1.60 footprint
STB19NF20, stf19nf20, stp19nf20 package mechanical data doc id 12758 rev 5 13/20 table 10. to-220fp mechanical data dim. mm min. typ. max. a4.4 4.6 b2.5 2.7 d2.5 2.75 e 0.45 0.7 f0.75 1 f1 1.15 1.70 f2 1.15 1.70 g 4.95 5.2 g1 2.4 2.7 h10 10.4 l2 16 l3 28.6 30.6 l4 9.8 10.6 l5 2.9 3.6 l6 15.9 16.4 l7 9 9.3 dia 3 3.2
package mechanical data STB19NF20, stf19nf20, stp19nf20 14/20 doc id 12758 rev 5 figure 24. to-220fp drawing 7012510_rev_k_b
STB19NF20, stf19nf20, stp19nf20 package mechanical data doc id 12758 rev 5 15/20 table 11. to-220 type a mechanical data dim. mm min. typ. max. a4.40 4.60 b0.61 0.88 b1 1.14 1.70 c0.48 0.70 d 15.25 15.75 d1 1.27 e 10 10.40 e2.40 2.70 e1 4.95 5.15 f1.23 1.32 h1 6.20 6.60 j1 2.40 2.72 l13 14 l1 3.50 3.93 l20 16.40 l30 28.90 ? p3.75 3.85 q2.65 2.95
package mechanical data STB19NF20, stf19nf20, stp19nf20 16/20 doc id 12758 rev 5 figure 25. to-220 type a drawing 00159 88 _typea_rev_ s
STB19NF20, stf19nf20, stp19nf20 packaging mechanical data doc id 12758 rev 5 17/20 5 packaging mechanical data table 12. d2pak (to-263) tape and reel mechanical data tape reel dim. mm dim. mm min. max. min. max. a0 10.5 10.7 a 330 b0 15.7 15.9 b 1.5 d 1.5 1.6 c 12.8 13.2 d1 1.59 1.61 d 20.2 e 1.65 1.85 g 24.4 26.4 f 11.4 11.6 n 100 k0 4.8 5.0 t 30.4 p0 3.9 4.1 p1 11.9 12.1 base qty 1000 p2 1.9 2.1 bulk qty 1000 r50 t 0.25 0.35 w 23.7 24.3
packaging mechanical data STB19NF20, stf19nf20, stp19nf20 18/20 doc id 12758 rev 5 figure 26. tape figure 27. reel p1 a0 d1 p0 f w e d b0 k0 t u s er direction of feed p2 10 pitche s c u m u l a tive toler a nce on t a pe +/- 0.2 mm u s er direction of feed r bending r a di us top cover t a pe am0 88 52v2 a d b f u ll r a di us g me asu red a t h ub c n reel dimen s ion s 40mm min. acce ss hole at s lot loc a tion t t a pe s lot in core for t a pe s t a rt 25 mm min. width am0 88 51v2
STB19NF20, stf19nf20, stp19nf20 revision history doc id 12758 rev 5 19/20 6 revision history table 13. document revision history date revision changes 13-oct-2006 1 first release. 17-nov-2006 2 part number has been modified. 02-feb-2007 3 preliminary version. 16-feb-2007 4 to-220fp package has been added. 15-oct-2012 5 updated section 4: package mechanical data and section 5: packaging mechanical data . minor text changes.
STB19NF20, stf19nf20, stp19nf20 20/20 doc id 12758 rev 5 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in military, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STB19NF20

	To Download STB19NF20 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .